EDGE AR-15 Series is a completely new line of AEG carbines in the Specna Arms family, designed to meet expectations of experienced airsoft players.

Manufactured under license of Rock River Arms®, well-recognized American real steel guns maker and equipped with GATE technology.

EDGE series takes Specna Arms brand to a higher level of realism and performance.

01

6.03 mm inner barrel

02

Helium ™ Flat Hop inside

03

Rotatory Hop-Up Chamber

04

Nano Coating Prevent from scratches

05

Orion ™ Gearbox Inside

06

ESA ™ -System inside

07

GATE X-ASR ™ Mosfet pre-installed

08

Individual serial number Licensed Rock River Arms markings*

09

2x S-MAG Mid-Cap in box

10

QD pistol grip

Just like the other series, Specna Arms® EDGE line is equipped with a quick spring change system. There is no need to take the gearbox out of the replica in order to exchange the spring or adjust the muzzle velocity to the required value. All you have to do is to disassemble the buffer tube by unscrewing just one screw, spin off the pin with the spring guide and change the spring.

The whole operation takes about one minute and requires only a screwdriver.

ONLY 45 SECONDS TO CHANGE SPRING

 

Step 1

Use a screwdriver to remove the screw holding together the stockpipe and the receiver; remove the stockpipe.

Step 2

Use a screwdriver to gently push the spring guide forward. Rotate the spring guide by 45 degrees until you feel the spring's tension.

Step 3

Pull the spring guide and spring out of the gearbox.

Orion gearbox is a result of several years of Specna Arms experience in the field of internal parts. This product stands for reliability, durability and battle-tested solutions from the top shelf.Steel gears and tooth rack along with reinforced gearbox shell provide the higher level of durability for stock spring as well as further, power tuning.

TOP