01
The precisely-made rotatory Hop-Up chamber
02
Polymer receiver reinforced with nylon fiber
03
Reinforced gearbox
04
ESA™ System inside
05
6.03 mm inner barrel
06
Individual serial number
07
S-MAG ™ Hi-Cap inbox
Just like the other series, Specna Arms® FLEX line is equipped with a quick spring change system. There is no need to take the gearbox out of the airsoft gun in order to exchange the spring or adjust the muzzle velocity to the required value. All you have to do is to disassemble the buffer tube by unscrewing just one screw, spin off the pin with the spring guide and exchange the spring.
Step 1
Use a screwdriver to remove the screw holding together the stockpipe and the receiver; remove the stockpipe.
Step 2
Use a screwdriver to gently push the spring guide forward. Rotate the spring guide by 45 degrees until you feel the spring's tension.
Step 3
Pull the spring guide and spring out of the gearbox.
The whole operation takes about one minute and requires only a screwdriver.
ONLY 45 SECONDS TO CHANGE SPRING
SPECNA ARMS FLEX
SPECNA ARMS FLEX - SIMPLICITY IN THE AIRSOFT WORLD
Specna Arms FLEX is a response to the constantly changing needs of airsoft players. It is a line of the lightest replicas, perfect for dynamic CQB games.
The main features of the series are light, polymer handguards, which increase the possibilities of quick usage of the replica or lightning-fast aiming. In combination with a rotary HU chamber, a precision barrel, a reinforced gearbox, and the ESA system Specna Arms FLEX are ideal Plug&Play replicas. Models from this line are also very good as bases for further modifications to increase power or rate of fire.
